The IP address 192.168.1.254 is used to access the configuration of a large number of routers, such as the modem / router companies Movistar, Telmex, Intercable and 2wire, it is also very common to access some modem or router brand Cisco 3560 , Thomson and Infinitum. So in this article we will explain how to access each router brand.
Note: Sometimes for configuration and testing purposes, 184.108.40.206 -t is used . This command is very common in cisco phone systems .
Access the Wi-Fi configuration of Infinitum Routers
If your router is Infinitum to access is 192.168.1.256, you will be asked for a username and a password, in the username you type TELMEX , in capital letters, in the password you have to put a code that is behind the modem that says “WEP KEY”.
Access the Wi-Fi settings of the Thomson TG789 V2 Technicolor Router
To enter these modems just like the other you have to access the IP mentioned at the beginning of this article, it is normal that you do not ask for username and password, in case you ask for such information, you put user admin and key 1234 .
For more details on how to configure Wi-Fi on these modem / router follow the manual steps of this link.
Enter 192.168.1.254 for Wi-Fi configuration of the Billion Enterprise Routers
You enter the same IP address from the browser by typing it in the address bar, then you will see a box which will ask for a username and a password, in the user name enter admin and the password admin .
Enter the configuration page of the 2Wire company’s router
To access these routers alike you have to access the address 192.168.1.254 , a window will appear asking for a username and a password, in the username you put admin and in the same admin password . If that information does not allow you to enter you have to set the wireless password .
If your router is from the company Netopia
To access these router sometimes is 192.168.1.1 and sometimes 192.168.1.254, try both ways, you will be asked for a username and a password, in the username put admin and the password also put admin , if do not enter with those credentials try with password 1234 and then press ENTER to access 192.168.l.254.
It is important to know that some of the router updates the firmware and some wireless configuration information may change.
==> If you have any doubts leave it in the comments, I will try to help you in the best way possible.