Sitecom Router Login & Basic Setup
A brief overview
Sitecom Router Login If you need to log in to your Sitecom router, follow the steps described here. To protect and set up your network, you must first change the default router login details.
Steps to log in to Sitecom Router
STEP 1 – Connect to your network
To log in to your Sitecom router, you will need to connect your device (smartphone or tablet) to your home network. This can be done using either your wireless connection or an Ethernet cable.
It doesn’t really matter how you do it. If you connect through Wi-Fi, there is a chance you may be logged out from the router admin page. Sitecom Router Login
STEP 2: Start your browser
Start the browser that you use most often.
You can type in the Sitecom router default address (192.168.0.1) into the browser’s URL bar. Depending on the router model you can also use http://sitecom.router/. This is applicable to WLR-1100 and WLR-2100 routers.
After pressing Enter, you will be asked for the Sitecom default username/password.
STEP 3: Enter your default Sitecom login details
The default username and password for SITECOM routers are:
- Username: “admin”
- Password: “admin” Check the sticker at the bottom of your router.
* Type the login details in lowercase letters
Configuration of the Basic Sitecom Router
Sitecom routers are just like routers made by other companies. They come with a default router IP and username, as well as a password. Sitecom routers also come with a default Network name, wireless password, and a default Network address. If you want to protect your router and network, you shouldn’t leave everything as it is.
There are some things that you must do first, as we’ve already said. Let’s get started!
Change the default Sitecom router password
It is strongly recommended that you change the default Sitecom router password.
Follow these steps: Sitecom Router Login
Login to your Sitecom router, as explained above.
- You can click on the Toolbox hyperlink in the top menu.
- Next, click on Password from the secondary menu.
- Enter the current password. This will allow changing your password.
- Enter a new password in New Password
- It is necessary for verification purposes to type it again in the Confirm password
- To save your changes, click on Apply.
Change the wireless password and network name of SITECOM
It is a big mistake to leave the wireless internet connection open. As we mentioned earlier, you must first connect to the network before you can log in to your router. Anyone can access router settings via an open wireless connection.
Protecting your network requires a unique name and a strong password.
Let’s take a look at what we can do right now.
- Click on the Safety tab from the secondary menu.
- Choose your SSID from SSID Select drop-down menu.
- Allow Set Broadcast to
- Set WMM to Enable
- Select WPA preshared key for encryption.
- For WPA Type, select HTMLPA2 (AES).
- Select Passphrase in the Preshared Key.
- In the Preshared Key, enter your new password
Important: Create a strong wireless password. A strong password can be created by combining small and capital letters with numbers or special characters.
Sitecom Router Login Also Search
|sitecom extender login||sitecom router login|
|router username and password||sitecom router login ip|
|my router ip login||sitecom router login page|
|192 168o 1 router login||sitecom router login details|
|sitecom learning center||sitecom router login admin|
It is simple to log in to your Sitecom router to protect your network. You can also access the admin settings page to enable the firewall, MAC address filtering, and other network security measures.
Do not be afraid to make necessary changes. You should make sure you take note of the changes that you make so you can revert to them later. Sitecom Router Login