How to Configure Router Tenda Router?
Configure Router Tenda Router While WiFi routers are with us for over a decade, a lot of people believe that installing an internet-connected router is a difficult job. Sure, it’s challenging in certain circumstances however generally it’s a procedure that takes a minimum of energy and time. Tenda routers are relatively easy to setup and configure using an easy and user-friendly administration panel. Let’s get into it.
The hardware component of the set-up process
As you might or might not be aware that a wireless router is an essential network device for wireless internet connectivity to several devices. In order for the router to function it must be connected to an electrical outlet in order to connect to the modem through Ethernet, a.k.a. the LAN cable.
So, after you have unpacked the Tenda router, you must find an appropriate location with a power socket and within range from the Ethernet cable you’ll use to connect to your modem.Configure Router Tenda Router
If you examine the back that is the Tenda router, you’ll find a number of ports on which you can connect the Ethernet cable. One of them is in a different hue (blue) and distinct from the other ports. Connect one end of your Ethernet cable into the blue port and the opposite cable into the modem. After that you can turn on the router, and wait for it to begin to boot (if you’re unsure you’re not sure, wait several minutes. Five to ten minutes.).
The Tenda router settings and how to access them
The settings and tools for the router are accessible via the administrator panel. There are two methods to access the admin panel: You’ll require a laptop, computer or other device with an Internet browser installed. In this case, you have the option of purchasing another Ethernet cable, and then connect your computer or laptop to one of the LAN ports located on the side of the router or make use of Wi-Fi.
As everyone owns a device that has Wi-Fi, we can use Wi-Fi as an illustration of how to connect access to the administrator panel.
Take the router off and take a note of the label located on the lower part of the router. The sticker is packed with important details you’ll require to access the administrator panel. Check under “default SSID as well as the ‘default IP address’. Note the information or write it down.
The default SSID is the name given to the wireless network that the Tenda router makes in default (e.g. Tenda_58FD0). This piece of information to determine where you can connect to areas that have multiple Wi-Fi networks. You’ll be able change the SSID later on to something more generic.
A default IP address serves as the way to reach the login screen and then access the administrator panel. Different manufacturers might use various default IP address however, for Tenda the default IP address should be 192.168.0.1 as well as 192.168.1.1.
You have everything you’ll ever need.
Navigate to the Wi-Fi settings on your phone and search for available networks. The SSID that is on the tag pop onto the list. Press it and connect.
Switch off the Wi-Fi setting and start your browser (i.e., Google Chrome, Mozilla Firefox, or any other browser you may be using on your phone). Then, enter your standard IP address (192.168.0.1) into the address bar.
If you type in the IP address you’ll get a quick setup screen. The router will recognize the kind of internet connection you are using from your Internet Service provider (ISP) and request specifics , if needed (e.g. username, username, and password in case you are using either PPPoE, IP or Subnet, gateway as well as DNS if have a static IP). If your connection to the ISP is dynamic which is the most frequent. In this situation, you do not need to alter anything on the section for internet connections on the screen.
On that same page, notice that Wi-Fi’s settings are listed. You can change the name of the WiFi network to something that is more memorable for you , and then create a password for the network. We suggest that you do both, and then tap the “OK” at the lower right corner part of your screen.
You’ll need to reconnect on the network of Wi-Fi. Next time, you should look for the name you registered if you have done do so. You should also enter the password.
You couldtheoretically just leave it as is, and then connect to Wi-Fi and the internet. But, there are a variety of security tools and security settings in the admin panel to look into.Configure Router Tenda Router
Important tools, settings and configurations for the Tenda router.
If connecting to the WiFi connection you created with your new SSID and password, type in an IP address that is the default and then enter into the Tenda Admin screen.
On the left to the right, see the options column, which is divided into various sections, i.e
- Internet settings
- Wireless Settings
- Bandwidth Control
- Repeating wireless
- Parental controls
Let’s take a look at each one and highlight the most significant ones. Let’s start at the bottom.
Administration -VERY IMPORTANT!
Contrary to other brands, Tenda routers will allow access to the admin panel with no needing the administrator’s username or password. It is ideal to set up the password for login when you first connect the router your router to the Internet. Anyone with access to your default IP is able to gain access to your router’s settings, and can cause you major headaches if you don’t.
Apart from this vital setting, you can set up or alter other more advanced settings like MTU (data size of the package) and clone the MAC address and set the maximum speeds for WANs, establish the DHCP IP address range change the settings of your router restart and update, etc. We do not recommend messing around with these settings unless you’re aware of the procedure, but making a password for login is vital!
Advanced settings are for users who are extremely knowledgeable. We wouldn’t suggest changing anything there until that you know what you’re doing. You can limit or ban only certain devices using the unique address of their MAC forward ports or create static IP addresses for certain devices, etc.
Parental control is an additional great tool for anyone needing greater control over sites that they can’t or won’t be able to connect to via Wi-Fi networks.
For instance you can restrict your child’s mobile phones laptops, tablets and computers to internet access for two hours during working days and four hours on weekends. It is also possible to block specific sites on each device or block all websites except the ones you prefer.
Repetition of wireless
It is possible that your router is in use and Tenda is used as an alternative. If that’s the scenario, you could configure it to work in AP repeater, AP, or WISP (Wireless Internet Service Provider) mode.
Control of Bandwidth
In this category, you are able to restrict the upload and download speed of each device that is connected to the router. This can be handy when you need to ensure that you have one or more devices has faster speeds, which means you can increase their speed by turning down other, less crucial devices.
The name suggests that hereyou will find the wireless settings. You can switch the Wi-Fi off and on and change the name of the network and password, create an individual network for guests, or for different user groups, set the network’s off time and then enable or disable an instant WPS connection. You can also choose the Wi-Fi standard you’ll be using and the size of the frequency range that you’ll be using in the event of high traffic.
Here you can select the type of internet connection (PPPoE Dynamic IP, or Static IP) and then enter the relevant parameters to ensure it works.
It lets you know the nature of the internet connection it shows the type of connection, how many devices are that are connected with the router and the amount of data that is transmitted through the router, and so on.
The process of setting up the Tandem router is fairly simple. When you connect the router’s power socket and modem then turn it on and then wait for it to boot.
Go to the wireless settings on your mobile and find the default SSID (Tenda_SOME_LETTERS_AND_NUMBERS) and TAP to connect. Open any browser on the internet and type 192.168.0.1 in the address field.
Then you will be able to access a simple setup page. You can change the domain name to something that is more easily recognized and then make the password. In addition, you must add the ISP parameters, if needed.
Save the settings, then reconnect to your router with your new SSID and password you set up.
Mercusys Router Login Also Search
|router admin password|
|login router password|
|how to find router username and password without resetting|
|how to find router username and password|
Visit the “Administration” section of the admin panel. Create an account password that blocks other users from accessing the admin panel. Check out other settings and establish the parental control profile and bandwidth profiles, if required.
Save the changes and then exit.Configure Router Tenda Router